Savin 4090 - Manual (Page 31)

Basic Procedure
21
2
Auto Start
If you press the
{{{{Start}}}} key during the warm-up period, the {{{{Start}}}} key will blink
and your copies will be made as soon as warm-up finishes.
AAAA
Make any adjustments to copy settings during the warm-up period.
BBBB
Place originals.
CCCC
Press the
{{{{Start}}}} key.
Copying Starts automatically when the
{{{{Start}}}} key indicator flashes red and
green indicating copy-readiness.
Interrupt Copy
Use this function to interrupt a long copy job to make urgently needed copies.
Note
❒ The procedure for making interrupt copies depends on the kind of operation
the machine is currently carrying out.
❒ You can use Document Server mode during Interrupt Copy.
❒ The previous copy job settings will be restored and the machine will continue
copying from where it left off.
AAAA
Press the
{{{{Interrupt}}}} key.
When the machine stops scanning
A Remove copied originals and place originals you want to copy.
B Press the {{{{Start}}}} key.
The machine starts making copies.
C When the copy job is finished, remove originals and copies.
D Press the {{{{Interrupt}}}} key again.
The Interrupt indicator goes out.
E When the display prompts you, place the remaining originals again be-
fore interrupting.
F Press the {{{{Start}}}} key.
When the machine continues copying
A Place the originals you want to copy.
B Press the {{{{Start}}}} key.
The machine stops the other job and starts copying the new original.