Savin 4090 - Manual (Page 14)

4
Control Panel
1. Status indicator
Machine status is described by this indi-
cator. By default, this indicator is turned
off. You can select to light the status indi-
cator. For more information, see “Control
Panel”, General Settings Guide.
2. {{{{Screen Contrast}}}} knob
Adjusts the brightness of the display pan-
el.
3. {{{{Language Selection}}}} key
Press to change the language of the dis-
play.
4. {{{{Check Modes}}}} key
Press to check the entered copy job set-
tings.
5. {{{{Interrupt}}}} key
Press to make interrupt copies during a
copy run. See p.21 “Interrupt Copy”.
6. {{{{Energy Saver}}}} key
Press to switch to and from Energy Saver
mode.
7. {{{{Clear Modes}}}} key
Press to clear any previously entered
copy job settings.
ZJAS060N
Colour Status
Off Main Power Switch
is tumed off or
ready to make cop-
ies
Flashing green Scanning originals
Lit green Copying (Ready to
scan originals)
Flashing red Toner has nearly
run out
Lit red Paper jam or other
malfunctions