Copying onto special paper – Savin 4090 User Manual

Page 35

Basic Procedure

Copying onto Special Paper

Copying onto OHP transparencies

To make copies onto OHP transparencies, you need to specify the paper type.
For details, see “Paper Tray Settings”, General Settings Guide.

AAAA

Select the paper tray in which the OHP transparencies are loaded.

Note

❒ You can not set the OHP transparencies into the optional A3/11" × 17" tray

unit if it is installed in Tray 1.

BBBB

Place originals, and then press the

{{{{Start}}}} key.

Important

❒ When copying onto OHP transparencies, remove copied sheets one by

one.

Copying onto tab stock

You can copy onto tab stock.

Preparation

Before using this function, set the tray for tab stock and set the position of the
index tab. See “Paper Type”, General Settings Guide.
You can set the tab stock in the LCT (Trays 4-5) and multi bypass tray (Tray 7).
Check the position of the index tab to avoid the image being sheared. See “Pa-
per Tray Settings”, General Settings Guide.