Samsung Digimax 420 - Manual (Page 86)

86
Warning indicator
There are several warnings that may appear in the LCD display
Warning indicator
CARD ERROR !
CARD FULL !
NO IMAGE !
NO CARD !
FILE ERROR !
LOW BATTERY !
CARD LOCKED !
Causes
- Card error.
- There is insufficient memory card
capacity to take an image.
- There are no images stored on the
memory card.
- A memory card is not inserted.
- The camera can’t recognize the
memory card.
- Memory card error.
- There is low battery capacity.
- The SD memory card is locked.
- Turn off the camera power and
turn it on again.
- Insert the memory card again.
- Format the memory card.(p.67)
MEMORY ERROR !
- Internal memory error. - Turn off the camera power and
turn it on again.
- Format the internal memory.(p.67)
- Insert a new memory card.
- Delete unnecessary image files to
free up some memory.
MEMORY FULL!
- There is insufficient internal
memory capacity to take an
image.
- Delete unnecessary image files to
free up some memory.
- Take images.
- Insert a memory card that is
holding some images.
- Insert a memory card.
- Insert the memory card again.
- Turn off the camera power and
turn it on again.
- Insert a new memory card.
- Contact camera service center.
- Insert fresh batteries.
- Slide the write protect switch to the
top of the SD memory card.
Remedy