Samsung Digimax 420 - Manual (Page 44)

44
Shooting
INFORMATION
To take continuous shots, the number of available shots must be more than 2 because the
minimum numbers of continuous shots permitted are 2. To take the AEB shots, the number
of available shots must be more than 3 because of the same reason.
Camera shake can be a problem when using the AEB shooting mode and it takes time to
store the AEB image to the memory. We recommend using a tripod.
In continuous shot and AEB mode, the digital zoom function will not operate.
When using the 16MB internal memory, the specified continuous shooting capacity will be
as follows. (These figures are intended as an indication of expected performance)
1. Rotate the mode dial to the STILL IMAGE mode and press
the MENU button.
2. Select the [STILL IMAGE 2/2] menu by pressing the RIGHT
button.
3. Select the [EXPOSURE] menu by pressing the UP/DOWN
button.
This camera automatically adjusts the exposure according to the ambient lighting
conditions. However, you can select the exposure value by using the [EXPOSURE]
sub menu. In the STILL IMAGE mode, you can select the exposure value.
If you increase the exposure value, the image will be brighter.
If you decrease the exposure value, the image will be darker.
Exposure
EXIT:MENU CHANGE:
STILL IMAGE 2/2
EXPOSURE +0.0 EV
ISO AUTO
W.BALANCE AUTO
SCENE NORMAL
STILL IMAGE mode
Digimax 420
Quality Size
Super fine 3 3 14 56
Fine 6 7 26 99
Normal 9 10 37 99