Samsung Digimax 420 - Manual (Page 79)

79
SETUP
Video out
The Movie output signal from the camera can be NTSC or PAL. Your choice of
output will be governed by the type of device (monitor or TV, etc.) to which the
camera is connected.
1. Rotate the mode dial to SETUP mode and the [SETUP 1/3]
menu will display.
2. Select the [SETUP 3/3] menu by pressing the RIGHT button
twice
3. Select the [VIDEO OUT] menu by pressing the UP/DOWN
button.
4. Press the RIGHT button and the cursor will shift to the
[VIDEO OUT] sub menu.
5. Select the desired sub menu by pressing the UP/DOWN
button.
6. Press the OK button to confirm the setting.
INFORMATION
Select the correct movie standard for the outer monitor. PAL mode can support only BDGHI.
NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
PAL
: Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland,
Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland,
Thailand, Norway.
BACK: SET:OK
SETUP 3/3
VIDEO OUT
NTSC
PAL
CHANGE :
SETUP 3/3
SOUND NORMAL
LCD NORMAL
VIDEO OUT NTSC
QUICK VIEW 01 SEC