Exposure, Recording, Information – Samsung Digimax 420 User Manual

Page 45

Text mode
Original mode

RECORDING

Exposure

INFORMATION

Exposure compensation setting range : -2.0 ~ +2.0 EV (0.5 EV steps)
This change to the exposure will remain until the camera is switched off. When the camera
is turned on again, the exposure compensation setting returns to 0.0EV (discarding the
exposure compensation).
When you have selected a change in exposure value, the value is displayed on the LCD.
Decreasing or increasing the exposure value may lead to images being under or over
exposed (too dark or too bright). Review your images using the LCD monitor to check that
they have been successful.

4. Press the RIGHT button and the cursor will shift to the

[EXPOSURE] sub menu.

5. Select the desired sub menu by pressing the UP/DOWN

button.

6. Press the OK button to confirm the setting.
7. Press the menu button and the menu display will disappear.

Take a picture.

STILL IMAGE mode

BACK:

SET:OK

STILL IMAGE 2/2

EXPOSURE