Samsung Digimax 420 - Manual (Page 56)

56
Voice( ) memo / Up( ) button
1. Press the LEFT/ RIGHT button to select an image that you
wish to add sound to.
2. Press the voice memo button ( ) and the voice memo
indicator will display. The camera is now ready to record a
voice memo.
3. Press the shutter button to start recording. The
[RECORDING] message will be displayed on the LCD
monitor (as shown) and the voice is recorded to the still
image for 10 seconds. The recording can be stopped by
pressing the shutter button again.
4. The ( ) icon will be displayed on the LCD monitor after
finishing the voice memo.
INFORMATION
The voice memo can t be recorded onto a movie clip file.
A distance of 40cm between you and the camera (microphone) is the best distance to record
sound.
When the menu is displayed on the LCD monitor, pressing the UP button makes the
menu cursor move up or change the sub menu value.
When the menu is not displayed on the LCD monitor, the UP button operates as the
voice memo button.You can add your audio to a stored still image.