Sony GV-HD700E - Manual (Page 93)

93
Q
u
ic
k Re
fe
renc
e
A REC (31)
B SEARCH SELECT (33, 34)
C Memory control buttons (PLAY,
INDEX, –/+) (46)
D DISPLAY (35)
E INDEX MARK (38)
F DATA CODE (60)
G ZERO SET MEMORY (32)
H Transmitter
I PHOTO (45)
J Power Zoom (37)
K . > (33, 34)
L Video control buttons (REW, PLAY,
FF, c I, STOP, i C, PAUSE,
SLOW, ×2) (21, 22)
M END SEARCH (33)
b Notes
• Aim the Remote Commander towards the
remote sensor to operate the VCR.
• Point the remote sensor away from strong light
sources such as direct sunlight or overhead
lighting. Otherwise, the Remote Commander
may not function properly.
• When operating your VCR with the supplied
Remote Commander, the other VCR may
malfunction. In this case, change the
commander code to other than VTR2 on the
other VCR or cover the sensor of the other VCR
with black paper.
To change the battery of the Remote
Commander
1 Slide the battery cover while holding it.
2 Remove the old R6 (size AA) batteries,
then replace them with the new one.
3 Close the battery cover. Insert it until it
clicks.
Remote Commander