Sony GV-HD700E - Manual (Page 59)

59
Cus
tom
iz
in
g y
o
u
r VCR
DELETE
You can delete the panel profile settings.
1 Select [DELETE].
2 Select the panel profile you want to
delete.
3 Select [YES] in the check screen.
The panel profile settings are deleted.
RESET
You can restore the default settings for
[LCD SET].
1 Select [RESET].
2 Select [YES] in the check screen.
The LCD panel setups are restored to
the default settings.
• LCD profiles stored on the VCR are
retained even when the [RESET] operation
is performed.
z Tips
• The items that can be saved in the LCD profile
are set values of [BRIGHTNESS],
[CONTRAST], [COLOR LEVEL], [COLOR
PHASE], and [SHARPNESS]. You can save
these set values all in the LCD profile.
• When you move the cursor on the LCD profile
stored on the VCR while selecting [LOAD],
[PROFILE NAME], or [DELETE], the settings
of the LCD profile will be effective on the
screen.
• When you move the cursor on the LCD profile
stored on the VCR and press b, the settings of
the LCD profile will be displayed on the screen.
You can select the desired aspect ratio of
the DV format picture displayed on the
screen.
B AUTO
Switches the aspect ratio automatically.
WIDE ( )
Sets the aspect ratio to 16:9.
4:3 ( )
Sets the aspect ratio to 4:3.
b Notes
• You cannot change the aspect ratio of the HDV
format picture and the still image displayed on
the screen.
• When setting [DV WIDE DISP] to [WIDE] or
[4:3] while displaying the color bar, the aspect
ratio of the picture will not change even if
or appears.
• When capturing a still image to “Memory Stick
Duo” media from a movie, the DV wide display
function does not work for the recorded still
image. The aspect ratio of the recorded still
image may differ from the image actually
displaying on the screen.
• The DV wide display function does not work for
output signals from the VCR.
• You cannot change the current setting while
displaying the color bar.
B LCD PANEL
Shows displays such as the time code on
the LCD screen.
V-OUT/PANEL
Shows displays such as the time code on
the TV screen and the LCD screen.
You can display the color bar or record it on
the tape by setting to [ON]. It is convenient
to adjust the color on the monitor connected
(the default setting is [OFF]).
b Notes
• This is automatically set to [OFF] when you
turn on the VCR at the next time or press REW
m/PLAY N/FF M.
DV WIDE DISP
DISP OUTPUT
COLOR BAR
Continued ,