Sony GV-HD700E - Manual (Page 15)

15
G
e
tti
ng St
a
rte
d
5
Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket).
The POWER/CHARGE lamp turns on
orange and charging starts.
The POWER/CHARGE lamp turns off
when the battery pack is fully charged.
After charging the battery pack,
disconnect the AC Adaptor from the
DC IN jack on the VCR.
b Notes
• The direction to attach the L series is different
from that of the M series (optional) (p. 15).
Make sure to attach your battery in the correct
direction. If you attempt to attach it in the wrong
direction forcibly, a malfunction may occur.
• Make sure not to come in contact with the other
battery terminal available for other battery packs
when charging your battery pack.
• Disconnect the AC Adaptor from the DC IN
jack by holding both the VCR and the DC plug.
To remove the battery pack
Set the POWER switch to OFF (CHG).
Push and hold the vBATT RELEASE
button and remove the battery pack.
L series:
b Notes
• When you remove the battery pack or
disconnect the AC Adaptor, make sure that the
POWER/CHARGE lamp is turned off.
To use the “InfoLITHIUM” battery
pack M series (optional)
To attach:
Attach the battery pack by holding the
center part (1) and sliding it in the
direction of the arrow (2) until it clicks.
Make sure that the battery pack is not
inclined and is locked to the VCR securely.
AC Adaptor
Power cord
(Mains lead)
To the wall outlet
(wall socket)
POWER/
CHARGE lamp
vBATT
RELEASE
button
Continued ,