Sony GV-HD700E - Manual (Page 28)

28
When connecting to your TV via the other VCR
Select the desired connecting method according to the input jack of the other VCR. Connect
the VCR to the LINE IN input on the other VCR using the A/V connecting cable. Set the input
selector on the other VCR to LINE (VIDEO 1, VIDEO 2, etc.).
When your TV is monaural (When your TV has only one audio input jack)
Connect the yellow plug of the A/V connecting cable to the video input jack, then connect the
white (left channel) or red (right channel) plug to the audio input jack of your TV.
If your TV/VCR has a 21-pin adaptor (EUROCONNECTOR) (GV-HD700E/1 only)
Use a 21-pin adaptor (optional) to view playback pictures.
b Notes
• When the A/V connecting cable is used to output images, images are output with SD (standard definition)
image quality.
z Tips
• If you connect the VCR to a TV using more than one type of cable to output pictures from a jack other
than the i.LINK jack, the order of priority of the output signal is as follows:
HDMI OUT
t COMPONENT OUT t A/V OUT
• HDMI (High-Definition Multimedia Interface) is an interface to send both video/audio signals. The
HDMI OUT jack outputs high quality images and digital audio.
(IN/OUT REC) t
[HDV/DV SEL] t
[AUTO] (p. 56)
[TV TYPE]
t
[16:9]/[4:3] (p. 57)
: Signal flow
Type VCR Cable TV Menu Setting
A/V connecting cable
(supplied)
(Red)
(White)
(Yellow)
Playing the picture on a TV (Continued)