Slant/Fin Hydronic Explorer 2 - Manual (Page 31)

Hydronic Explorer 2 User Manual
a. If you select Gas as the fuel type, you will have to enter a value for altitude and select a venting
type in pane #2. Enter an altitude value then click on the down-arrow in Venting and select a type
(atmospheric chimney venting, power venting, or sealed combustion) from the pull-down menu.
Click on the down-arrow in Boiler Type and select a type from the pull-down menu.
Natural or Propane Gas Boiler Type
b. If you select Oil as the fuel type, you will have
to indicate the boiler type. In pane #2, click on
the down-arrow in Boiler Type and select a
type (boiler, boiler with tankless coil, or boiler
with indirect hot water heater) from the pull-
down menu.
Oil
c. You are not required to select a boiler type if you select Dual Fuel as the fuel type.
Slant/Fin Corporation 27