Sony MZ-NH1 - Manual (Page 34)

34
z
If you want to check the playing position or
track name while playing, see “Viewing various
information” (page 43).
1
Enter the menu and select “Display”.
2
Press the 5-way control key towards
FR or FF until the information you
want appears in the display, and then
press the control key to enter the
selection.
Each press of the 5-way control key
(towards
FR or FF ) changes the
display as follows.
Lap Time
t RecRemain t Clock
When you press the 5-way control
key, the selected information appears
at D and E.
Display window on the recorder
While the recorder is stopped or
recording
D/E
• When using the disc in Hi-MD mode, the free
space will show as “2.0MB” when the
remaining recording time becomes
“–0:00:00”. This is a system limitation,
“2.0MB” being the capacity of the reserve
domain.
• Depending on the group settings, the
operating conditions, and the disc settings,
you may not be able to select certain
indications or the indications may appear
differently.
Recording from a
microphone
1
Connect the stereo microphone to the
MIC (PLUG IN POWER) jack.
2
Press and slide zREC to start
recording.
On the recorder
D E
Track number Elapsed time
Track number • Remaining
recordable time/
remaining free space
(Hi-MD)
• Remaining
recordable time (MD)
— (none) Time
5-way control key
(NENT, FR, FF)
MENU
Notes
To MIC (PLUG IN POWER)
Stereo
microphone*
z REC
∗
See “Optional accessories” (page 79).
5-way control
key (NENT,
FR, FF)
Jog dial
MENU