Sharp SD-PX2 - Manual (Page 54)

E-49
ENGLISH
SD-PX2
Ad
v
a
nced Features
- O
p
er
at
ions a
ft
e
r se
tt
ing t
h
e t
ime
r -
Operations after setting the timer
„ In the timer stand-by mode
Checking the timer setting:
Canceling the timer setting:
„ To use the same timer setting
Once timer:
Daily timer:
The timer will operate at the same time every day. It will continue until the daily timer
setting is canceled. Cancel the daily timer when it is not in use.
When you use the same setting for the daily timer, select "TIMER DAILY" instead of
"TIMER ONCE", and select "DAILY ON" instead of "ONCE ON".
1
After setting the timer
z The unit is in the timer stand-by mode.
z If the timer set indicator does not light up, turn on the power and set the timer
again.
2
At the start time
The volume will increase gradually until it reaches the preset volume.
3
When the finish time is reached:
The unit is set to the power stand-by mode automatically.
Lights up
flashes
or
1 Set the MODE 1/MODE 2 switch to MODE 2 and press the TIMER/SLEEP button.
2 Within 10 seconds, press the or button to select "TIMER ONCE" or "TIMER
DAILY", and press the ENTER button.
3 Within 10 seconds, press the or button to select "ONCE CALL" or "DAILY
CALL", and press the ENTER button.
The unit returns to the timer stand-by mode after displaying the settings in order.
1 Set the MODE 1/MODE 2 switch to MODE 2 and press the TIMER/SLEEP button.
2 Within 10 seconds, press the or button to select "TIMER ONCE" or "TIMER
DAILY", and press the ENTER button.
3 Within 10 seconds, press the or button to select "ONCE OFF" or "DAILY OFF",
and press the ENTER button.
Timer will be canceled (the setting will be retained).
1 Turn on the power, set the MODE 1/MODE 2 switch to MODE 2 and press the TIM-
ER/SLEEP button.
2 Within 10 seconds, press the or button to select "TIMER ONCE", and press
the ENTER button.
3 Within 10 seconds, press the or button to select "ONCE ON", and press the
ENTER button.
4 Press the ON/STAND-BY button to enter the power stand-by mode.