Sharp SD-PX2 - Manual (Page 21)

E-16
ENGLISH
SD-PX2
Preparation f
o
r Use
- Gener
a
l c
o
ntr
ol
-
General control
„ Volume control
„ Muting
„ To change the display brightness (2 levels)
Set the MODE 1/MODE 2 switch to MODE 1 and hold down the DISPLAY button for 3
seconds or more.
Each time you press, brightness changes.
Note:
The blue light on the right side of the volume control goes out when the display dims
with "DIM ON" or "DIM AUTO".
Main unit operation:
When the VOLUME control is turned clockwise,
the volume will increase. When it is turned coun-
terclockwise, the volume will decrease.
Remote control operation:
Press the VOL + button to increase the volume
and the VOL - button for decreasing.
The volume is muted temporarily when pressing
the MUTE button on the remote control.
z Press again to restore the volume.
z The mute status is canceled when you adjust
the volume.
Dimmed (*) Brightened
(*) After approx. 5 seconds of DVD-Video playback, the display dims and the original
brightness returns when you stop playback. The brightness remains unchanged
during playback of other media.
0 1 2
.....
38 39 40