Sharp SD-PX2 - Manual (Page 26)

E-21
ENGLISH
SD-PX2
D
V
D Oper
ation
- U
s
e
ful
o
p
e
ra
ti
on
-
Useful operation
„ To play in the desired order (programmed
play)
You can play chapters (tracks) in the desired order within a title (group). 24 chapters
can be programmed (programmed play). Titles (groups) cannot be programmed.
To add numbers to the program:
Repeat steps 1 and 3.
Additional chapter (track) numbers are added immediately after the chapter (track)
already programmed.
To delete all numbers in the program:
To cancel the operation:
Press the PROGRAM button.
To repeat the disc using programmed play:
Press the PROGRAM button, and then press the button.
Programmed play is canceled when playback stops.
Notes:
z Programming cannot be performed while paused or in the playback mode.
z Programmed play is prohibited on some discs.
z Chapters in other titles cannot be programmed together.
z For programmed play on DVD-Audio discs, select groups or tracks.
z For an MP3 disc, programmed play is not available.
1
In the stop mode, set the MODE 1/MODE 2 switch to MODE 1 and
press the PROGRAM button.
Example: DVD
The programming screen is displayed.
To program tracks on SACD/CD discs, go to
step 3.
2
Select a title number with the or
button and press the ENTER button.
The chapter selection screen appears. Cursor
DVD-VIDEO PROGRAM
TITLE
T 1
T 2
DVD-VIDEO PROGRAM
TITLE
T 1
T 2
3
Use the or button to select a
chapter (track) number, and press
the ENTER button.
z The number is saved in the confirmation
area. Selection area Confirmation
area
z Repeat the operation to program another number.
z To correct, press the button to move the cursor to the confirmation area, se-
lect the chapter (track) number with the or button, and press the CLEAR
button. After deleting the number, press the button to return the cursor to
the selection area.
4
Press the button to start playback.
z The unit stops after playing the chapters (tracks) in the programmed order.
z The programmed contents will be stored until the disc is removed.
1 In the stop mode, press the PROGRAM button.
2 Press the button to move the cursor to the confirmation area.
3 Press the CLEAR button for 4 seconds or more.
DVD-VIDEO PROGRAM
T : 1
C 1
C 2
C 3
C 4
C 5
C 6
T : 1
1: C 1
2: C
3: C
4: C
5: C
6: C