Sun Microsystems SG-XPCIE1FC-EM8-Z - Manual (Page 40)

14 Sun StorageTek 8 Gb FC PCI-Express HBA, Emulex Installation Guide • December 2008
FIGURE 2-4 Attaching the Optical Cable
2. Connect the other end of the cable to the FC device.
After the optical cable is connected to the HBA, you can power on the system.
▼ To Apply Power
1. Verify that the HBA is securely installed in the system.
2. Verify that the correct fiber-optic cable is attached.
3. Refer to your system installation or service manual to determine how to power
on the system.
▼ (LED) Status
Yellow and green LEDs can be seen through openings in the mounting bracket of
the HBA. Each port has a corresponding set of yellow and green LEDs (see
FIGURE 2-5 ).