SPT WA-1211S - Manual (Page 6)

5
AIR CONDITIONER FEATURES (CONTINUED)
NOTE: The following instruction represent the Unit Controls, the same instructions can be used for the
Remote Control.
TO TURN UNIT ON:
DO THIS:
Press the On/Off button.
DO THIS:
Press to increase
Press to lower
TO CHANGE TEMPERATURE
SETTING:
TO ADJUST FAN SPEEDS:
DO THIS:
Press to select
appropriate fan
speed
NOTE:
Press or hold either Left (<) or Right (>) button
until the desired temperature is seen on the
display. This temperature will be automatically
maintained anywhere between 62°F (17°C)
and 86°F (30°C). If you want the display to
read the actual room temperature, see “To
Operate on Fan Only” section.
NOTE:
Select Fan Speed in four steps – Auto, Low,
Med or High. Each time the button is pressed,
the fan speed mode is shifted. In Dry mode,
the fan speed is set at Low automatically.