SPT WA-1211S User Manual
Page 19
18
Timer Operation
Press the TIMER button to initiate the Auto-Start or Auto-Off program.
Timer can be set up to 24 hours.
1. Press the TIMER button to program Timer-On or Timer-Off, the
corresponding indicator will illuminate on unit’s control panel.
2. Press or hold the UP/DOWN button to program time in 0.5 hour
increments, up to 10 hours, then in 1 hour increments up to 24 hours.
Control will count down the remaining time till start/stop.
3. The programmed time will register after 5 seconds and panel will revert
back to displaying the previous temperature setting.
4. Turning the unit ON or OFF at any time will cancel programmed Timer.
NOTE
To cancel TIMER setting, press the TIMER button while pressing either UP
or DOWN button until 0 hour is displayed.
Combined Timer
You can program both Timer-On and Timer-Off simultaneously
AUTO OFF
→
AUTO START
This feature is useful when you want to stop the air conditioner after you go
to bed and start it again in the morning or when you return home from work.
Example: To stop the air conditioner after 2 hours and start it again in 10
hours:
1.
Press the TIMER button until the TIMER-OFF indicator is displayed on
unit’s control panel.
2.
Use the UP/DOWN button to set “2.0” hours.
3.
Press the TIMER button again until TIMER-ON is displayed on control
panel.
4.
Use the UP/DOWN button to set “10” hours.
5.
Wait for 5 seconds for program to be registered and panel to revert back to
previous display.
AUTO START
→
AUTO OFF
This feature is useful when you want to start the air conditioner before you
wake up and stop it after you leave the house.
Example: To start the air conditioner in 5 hours and stop it after 8 hours:
1.
Press the TIMER button until the TIMER-ON indicator is displayed on
unit’s control panel.
2.
Use the UP/DOWN button to set “5.0” hours.
3.
Press the TIMER button again until TIMER-OFF is displayed on control
panel.
4.
Use the UP/DOWN button to set “8” hours.
Wait for 5 seconds for program to be registered and panel to revert back to
previous display.