SPT WA-1211S - Manual (Page 17)

16
Operation starts when
this button is pressed
and stops when the
button is pressed again.
Push this button to
increase the
temperature setting in
1°C/1°F increments to
30°C/86°F.
Auto Operation
Ensure the unit is plugged in and power is available.
1. Press the ON/OFF button to start the air conditioner.
2. Press the MODE button to select AUTO.
3. Press the TEMP UP/DOWN button to set desired temperature.
The temperature can be set within the range of 17~30°C/62~86°F
in 1°C/1°F increments.
NOTE
In Auto mode, the unit will choose the operating mode (Cooling or
Fan) by sensing the difference between actual ambient
temperature and set temperature on the remote
In Auto mode, fan speed cannot be changed.
If the Auto mode is not comfortable for you, select desired mode
and set temperature manually.
Press this button and system will
automatically shift to COOL mode
with auto fan speed. The setting
temperature is 26°C/80°F. Any timer
setting will be cancelled.
Press this button to
select the desired
operation mode from
AUTO, COOL, DRY and
FAN.
Push this button to
decrease the
temperature setting in
1°C/1°F increments to
17°C/62°F.
Used to select the fan
speed in four steps: Auto,
Low, Med and High
Press this button to activate the
Sleep mode. This function is
available in COOL or AUTO mode
only and maintains the most
comfortable temperature for you.
Push this button to
increase the temper-
ature setting in 1 C/1 F ° °
increase to 30 C/86 F. ° °
Push this button to
activate the "Auto
Start"or"Auto Stop"
program.