Samsung CX2 - Manual (Page 123)

121
Sh
oo
ting
Me
nu
4
You can prevent camera shake by turning on the camera shake
correction function.
At the time of purchase, the camera shake correction function is
turned on.
1
Display the shooting menu.
• For information on using the menu, see P.100.
2
Press the ADJ./OK button "
to select [Camera Shake
Correction] and press the
button $.
3
Press the button !" to select
[On].
4
Press the ADJ./OK button.
• The symbol appears on the screen.
Caution------------------------------------------------------------------------------------------
• The camera shake correction function is not available for movie mode, continuous
mode, multi-target AF and long time exposure. If multi-target AF, or long time
exposure is set while the camera shake correction function is turned on, E
changes to F. E disappears when the mode dial is set to 3 or R.
• The camera shake correction function cannot prevent movement of the shooting
subject (caused by wind, etc.).
• Effects of the camera shake correction function vary depending on the surroundings.
Note ----------------------------------------------------------------------------------------------
The J symbol appears when camera shake is likely to occur. (GP.33)
Camera Shake Correction