Southbend 6" x 18" SURFACE GRINDER SB1029 - Manual (Page 57)

For Machines Mfg. Since 8/09 Model SB1029
-55-
P A R T S
The safety labels provided with your machine are used to make the operator aware of the
machine hazards and ways to prevent injury. The owner of this machine MUST maintain the
original location and readability of these safety labels. If any label is removed or becomes
unreadable, REPLACE that label before using the machine again. Contact South Bend Lathe Co. at
(360) 734-1540 or www.southbendlathe.com to order new labels.
REF PART # DESCRIPTION REF PART # DESCRIPTION
301 PSB1029301 MACHINE ID LABEL 316 SB1321 SOUTH BEND NAMEPLATE 5 203MM
302 PSB1029302 BEST GRINDING RESULTS LABEL 317 PSBPAINT03 SB DARK BLUE TOUCH-UP PAINT
303 PSB1023305 TABLE TIP WARNING LABEL 318 PSBPAINT01 SB GRAY TOUCH-UP PAINT
304 PSBLABEL15L ELECTRICITY LABEL 1.4 319 PSB1029319 MODEL NUMBER LABEL
305 PSB1029305 CHECK LUBRICANT LABEL 320 PSBLABEL09VL EYE/FACE/LUNG LABEL 2 X 3.25
306 PSB1029306 MANIFOLD ADJUSTMENT LABEL 321 PSB1029321 REMOVE BLOCKS HANG TAG
307 PSBLABEL06HL BIOHAZARD LABEL 3.25 X 2 322 PSBPAINT02 SB LIGHT BLUE TOUCH-UP PAINT
310 PSB1029310 CABLE DRIVE ADJUSTMENT LABEL 323 PSB1029323 ROTATION LABEL
311 PSB1029311 220V 3-PH LABEL 324 SB10271205 TRAINED PERSON ONLY LABEL
312 PSBLABEL02VL DISC POWER LABEL 2 X 3.25 325 SB1319 SOUTH BEND NAMEPLATE 3 90MM
313 PSBLABEL15L ELECTRICITY LABEL 1.4 326 PSB1029326 SOUTH BEND LOGO RECT
314 PSBLABEL01VL READ MANUAL LABEL 2 X 3.25
Machine Labels List