Ph on e b as ics – Sprint Nextel VISION S1 User Manual
Page 39
Section 2A: Phone Basics
23
Installing the Battery
To install the Li-Ion battery:
1.
Insert the battery into the opening on the back of the
phone (1) and gently press down (2).
2.
Place the battery cover into the position as indicated in
the diagram (3), and slide it until you hear it snap into
place. Then, slide the battery release latch.
Removing the Battery
To remove your battery:
1.
Make sure the power is off so that you don’t lose any
stored numbers or messages. Slide the battery release
latch (1), and then slide the battery cover and remove
it (2).
2.
Use your thumbnail to lift and then remove the battery
as indicated in the diagram (3).
2
1
3
WARNING
Do not handle a damaged or leaking Li-Ion battery as
you can be burned.
3
2
1
Ph
on
e
B
as
ics