Samsung SIR-S60W - Manual (Page 16)

Setting Up and Connecting
11
Make sure the power cords for your Multi-Satellite Receiver, TV, and VCR are
unplugged before connecting any of the cables.
Connect your satellite dish antenna to the SATELLITE IN jack on the back of
the Multi-Satellite Receiver with RG-6 coaxial cable running from the dish.
Connect your cable or off-air antenna to the IN FROM ANTENNA jack on the
back of the Multi-Satellite Receiver with the coaxial cable running from the
cable system or installed off-air antenna.
Connect the Multi-Satellite Receiver TEL LINE jack to a telephone wall jack
with the included telephone cord.
Connect the Multi-Satellite Receiver TV OUT jack to the IN FROM ANT
terminal on the VCR with the included short coaxial cable.
Connect the VCR OUT TO TV jack to the IN terminal on the TV with a short
coaxial cable (not included).
Connect the power cords for your Multi-Satellite Receiver, TV, and VCR to
wall outlets.
1
2
3
4
5
6
7
To watch DIRECTV programming
With your VCR in TV mode or powered off, tune your TV to channel 3, the default
TV output channel of your system. You can later change the default channel to
channel 4 by choosing TV Settings from the Setup Menu (see page 45).
To record DIRECTV programming
Tune your Multi-Satellite Receiver to the desired channel and set your VCR to record
on channel 3 or 4, depending on your setting for the default TV output channel.
To view VCR recordings
Tune your TV to the default TV output channel (channel 3 or 4) and press play on
your VCR.
Basic Connection Set Up Steps: