Setting up and connecting, Things to know befor – Samsung SIR-S60W User Manual

Page 14

Things to know befor

e you connect the

Multi-Satellite Receiver to your TV set and

other components

Protect your components from power surges

Always turn off and unplug your Multi-Satellite Receiver, TV, and any
other components before connecting or disconnecting any of the cables.

Make sure to position all cables correctly to avoid audio hum or interference

• Make sure that all cables are plugged or screwed tightly into their jacks.
• After connecting the components, please run the audio/video cables along

the side of the TV set, rather than straight down the back of the TV.

• Please make sure that all antennas and cables are properly grounded.

Make sure to protect your components from overheating

• Do not block ventilation holes in the top of the Multi-Satellite Receiver,

or any other components. Make sure to position the components so that
air can circulate freely.

• Do not stack components.
• If you are positioning the components in a stand or rack, make sure to allow

for proper ventilation.

• If you have a stereo amplifier or receiver as a system component, please place it

on the top shelf or top rack so that hot air rising from it will not flow around
other components.

Setting Up and Connecting