Savin F ax Machine 1018 - Manual (Page 58)

Setup
48
3
N
Press the
{{{{OK}}}} key.
If you want to store another Speed
Dial number, go to step
E.
O
Press the
{{{{User Tools}}}} key to re-
turn to standby display.
Speed Dial list
Print this list to check which destina-
tions are programmed. See Chapter 5
“Printing Reports/Lists” in the Ad-
vanced Features manual.
Deleting Speed Dial
Use this procedure to delete any
Speed Dials you are not using any-
more.
Limitation
❒ If a registered Speed Dial is being
used for a standby Memory Trans-
mission, the message "
This Dial
is in Use. Cannot Delete.
" is
shown and you cannot change the
destination for this Speed Dial.
A
Press the
{{{{User Tools}}}} key.
B
Press
0 0 0 0 or 1 1 1 1 until "4. Fax Fea-
tures" is displayed.
C
Press the
{{{{OK}}}} key.
Confirm that "1. Program / Delete"
is displayed.
D
Press the
{{{{OK}}}} key.
E
Press
0 0 0 0 or 1 1 1 1 until "4. Del. Speed
Dial" is displayed.
F
Press the
{{{{OK}}}} key.
G
Display the Speed Dial number
you want to delete (00 to 99).
Enter the Speed Dial number with
the number keys or search using
0
or
1.
The Speed Dial number and the fax
number or name are displayed.
Note
❒ If you want to delete a digit of
the number, press the
{Clear/
Stop
} key and enter the correct
number.