Savin F ax Machine 1018 - Manual (Page 137)

Facsimile User Tools
54
5
Changing the Initial Setup Transmission
When you turn on the machine or re-
turn to Copy mode, the machine re-
turns to the home settings. You can
change these home settings so that
the machine starts with your most fre-
quently used features selected.
This procedure can be used to change the
home settings for the following functions.
• Transmission mode
See Chapter 2 “Faxing” in the Basic
Features manual.
• Resolution
See Chapter 2 “Resolution” in the
Basic Features manual.
• Photo Original
See Chapter 2 “Original Type” in
the Basic Features manual.
• Fax Reset Timer
See Chapter 1 “Starting the Ma-
chine” in the Basic Features manual.
• On Hook Timeout
See P.25 “On Hook Dial”.
Note
❒ You can also choose whether the
machine returns to the home set-
tings after each communication.
S e e P . 7 2 “ U s e r P a r a m e t e r s ”
(Switch01, Bit7).
A
Press the
{{{{User Tools}}}} key.
B
Press
0 0 0 0 or 1 1 1 1 until "4. Fax Fea-
tures" is displayed.
C
Press the
{{{{OK}}}} key.
D
Press
0 0 0 0 or 1 1 1 1 until "4. Initial Set-
up TX" is displayed and press the
{{{{OK}}}} key.
The "Initial Setup TX" menu is
shown on the display.
E
Press
0 0 0 0 or 1 1 1 1 until the mode you
want to change is displayed and
press the
{{{{OK}}}} key.
Note
❒ If you make a mistake, press the
{Clear/Stop} key and enter the
correct number.
F
Select the home setting with the
0 0 0 0 or 1 1 1 1 key then press the {{{{OK}}}}
key.
❖ ❖ ❖ ❖ Transmission Mode
You can select the either way to
send a fax message (Me mory
Transmission or Immediate Trans-
mission).