Smeg 910TB000 - Manual (Page 10)

Instructions for the user
THERMOSTAT KNOB
(multifunction oven)
Cooking temperature is selected by
turning the knob clockwise to the desired
setting, between 50° and 250°C.
HOB CONTROL KNOB
Used to control the temperature on the hob. Rotate
clockwise to set to desired value (2 to 12).
HOB CONTROL KNOB
WITH DUAL ZONES
Used to select heating zone in plates
with dual heating zones.
Rotating the knob clockwise from
between 2 to 12 heats the inner zone
within the small diameter.
Setting knob to or
and releasing it (knob returns to 12) causes both
zones to be heated. To adjust heat intensity, turn the knob anticlockwise
to the desired value.
To return to heating inside the inner zone only, set knob first to 0 and
then to any value between 2 and 12 as desired.
THERMOSTAT INDICATOR LIGHT
When this light comes on, the oven is heating up.
When this light goes out, the preset heating
temperature has been reached.
When the light flashes, the temperature inside the
oven is steady at the set temperature.
37