Sanyo Xacti VPC-E2 - Manual (Page 174)

157
English
CONNECTING TO A PRINTER
CONNECTING TO A PRINTER
PictBridge MODE
Your camera supports the PictBridge function. By connecting the camera
directly to a PictBridge-enabled printer, the camera’s monitor can be used to
select images and initiate printing (PictBridge printing).
Use the dedicated USB interface cable to connect the camera to a printer.
Print preparations
1
Turn the printer on, and use the supplied USB interface cable to
connect the camera to the printer.
h Connect the camera’s USB/AV terminal to the printer’s USB
connector.
2
Turn on the camera (page 30).
h The USB Connection Screen appears on the camera’s monitor.
OK CANCEL
USB CONNECTION
CANCEL
PRINTER
COMPUTER
Supplied dedicated USB interface
cable
To USB connector
on the printer
To the USB/AV terminal on the camera
SET button