Sanyo Xacti VPC-E2 - Manual (Page 114)

97
English
LIGHT-MEASURING MODE SETTING
You can select from 3 types of light-measuring modes.
Multi-section light-measuring:
The light is modulated after sampling from multiple areas of the entire
shooting screen.
Center-weighted light-measuring:
The light is modulated for the entire image after measuring from mostly the
center area.
Spot light-measuring:
You can compose the picture and capture the image after first modulating the
light only at the center spot of the monitor.
1
Display the NORMAL Mode Shooting Menu (page 37), select “EXP
MEASURE”, and press the SET button.
2
Select the desired light-
measuring mode, and press the
SET button.
h This completes the light-
measuring mode setting.
h When spot light-measuring is
selected, the light-measuring
spot mark
appears in the
center of the monitor.
n: Multi-section light-measuring
W: Center-weighted light-measuring
Y: Spot light-measuring
TV-SHQ
40 00:02:47
Light-measuring spot mark