Woodstock THE SHOP FOX D2722 - Manual (Page 36)

SHOP FOX ® .Drill. Press. Vises use precision ground steel guide rods,
smooth-action Acme threads, ground steel jaws, with fixed jaw
V-grooves for holding round stock, and dovetailed ways where
applicable.
D2727 SHOP FOX ® (3" Basic Vise)
D2728 SHOP FOX ® (4" Basic Vise)
D2729 SHOP FOX ® (6" Basic Vise)
D2933 SHOP FOX ® (3 3 ⁄
4
" Angle Vise)
D2730 SHOP FOX ® (3" Cross Sliding Vise)
D2731 SHOP FOX ® (4" Cross Sliding Vise)
The 4".PRO-STIK ® Stick with Handle is the easiest solution for increasing
the life of sanding sleeves by removing pitch and sawdust particles from
the abrasive pores, which later harden in place if not removed. Simply
press the cleaner lightly against the moving abrasive surface to remove
clogged-up pitch and sawdust. PRO-STIK ® cleaners are available in other
sizes for any cleaning application that would need cleaners with handles,
as blocks, or as flat pads. (Not recommended for wide-belt sanders.)
-34-
The following drill press accessories may be available through your local Woodstock International Inc.
Dealer. If you do not have a dealer in your area, these products are also available through online dealers.
Please call or e-mail Woodstock International Inc. Customer Service to get a current listing of dealers at:
1-800 840-8420 or at [email protected].
D2677. Drum. Sander. Set includes three rubber sanding drums 4 1 ⁄
4
" in
length to accommodate 1", 1 1 ⁄
2
" and 2" diameter sanding sleeves. This kit
also includes one 80 grit sleeve for each drum to get things started.
D2722.Mandrel is a 3 ⁄
8
" shank and is required to use with the Drum Sander
Set with any drill press.
Drill. Press. Clamps adjust quickly and easily to lock your workpiece
in any position. The clamping pad pivots to conform to any workpiece,
ensuring uniform pressure.
W1301 6" Drill Press Clamp (1 1 ⁄
2
" Capacity)
D2192 10" Drill Press Clamp (3" Capacity)
D2493 12" Drill Press Clamp (5" Capacity)
Accessories
Sanding.Sleeves are sized to fit the D2677 Drum Sander Set. These hard
Sanding Sleeves are available in 60, 80, 100, 120, and 150 grits. Keep
plenty of these consumable Sanding Sleeves on hand.
Sanding.Sleeves
. Size.
. (Dia..x.Ht.) . 60.Grit. 80.Grit.. 100.Grit. 120.Grit. 150.Grit
. 1".X.4 1 ⁄
4
". D2683. D2684. D2685. D2686. D2687
. 1 1 ⁄
2
".X.4 1 ⁄
4
". D2688. D2689. D2690. D2691. D2692
. 2".X.4 1 ⁄
4
". D2693. D2694. D2695. D2696. D2697
MAINTENANCE