Sony XDCAM EX PMW-EX1 - Manual (Page 98)

Setup Menu List 98
Me
n
u
C
o
nf
igur
at
io
n
a
nd Det
a
ile
d Set
tings
Shot
Transition
Setting the
operating
conditions of Shot
Transition
Trans Time
2 to 15 sec (4 sec)
Set the time it takes to make a shot transition.
Trans Speed
1 to 10 (5)
Set the speed of the transition.
Time / Speed
Time / Speed
Determine whether to specify the transition by time or speed.
Trans Curve
Linear / Soft Trans / Soft Stop
Select the transition pattern.
Linear: To make the transition linearly
Soft Trans: To make the transition slowly at the beginning and
end, but linearly in between
Soft Stop: To make the transition slow down near the end
Start Timer
Off / 5 sec / 10 sec / 20 sec
Set the waiting time until the shot transition begins.
Rec Link
Off / Shot-A / Shot-B
Set the function to start a shot transition linked to recording
start.
Off: To start the transition using a button without linked to
recording start
Shot-A: To start a transition to Shot-A linked to recording
start
Shot-B: To start a transition to Shot-B linked to recording
start
MF Assist
Turning the MF
Assist Function
on/off
On / Off Set to “On” to precisely adjust the focus automatically after
you roughly adjust it manually.
Color Bar Type
Selecting the types
of color bar
Multi / 75% / 100% Select the type of color bars displayed when you press the
BARS/CAM button.
Multi: To output multiformat color bars
75%: To output 75% color bars
100%: To output 100% color bars
Flicker Reduce
Setting Flicker
Compensation
Mode
Auto / On / Off
Set the operation of the Flicker-Reduction function.
On: To always activate it
Auto: To automatically activate it when flicker is detected.
Off: To not activate it
Frequency
50 Hz / 60 Hz
Set to the power supply frequency of the light source causing
flicker.
Zoom Speed
Setting the zoom
speed
High
0 to 99 (70)
Set the speed of zooming to be executed when you press the
on-handle ZOOM button with the zoom speed switch set to
H.
Low
0 to 99 (30)
Set the speed of zooming to be executed when you press the
on-handle ZOOM button with the zoom speed switch set to L.
Remote
0 to 99 (50)
Set the speed of zooming to be executed when you press the
ZOOM button of the IR Remote Commander.
CAMERA SET
Menu items Subitems and setting values Contents