Sony XDCAM EX PMW-EX1 - Manual (Page 64)

Shot Transition 64
Record
ing
When adjustments are required, set the mode to
Store.
Before you start recording using the Shot
Transition function, make the necessary settings
with the CAMERA SET menu in advance.
The conditions you set are indicated in the shot
transition information area on the screen when
you set the shot-transition operation mode to
“Execute.”
Shot-transition information area
Setting procedure
1
Select “Shot Transition” from the
CAMERA SET menu.
2
Specify the conditions for a shot
transition.
Trans Time
After you set “Time/Speed” to “Time,” set
the duration of a transition in the range of 2
to 15 sec in steps of 1 second.
Trans Speed
After you set “Time/Speed” to “Speed,” set
the zoom transition speed (specifying the
time to be taken for the zoom moving from
the TELE end to the WIDE end at a certain
speed).
The setting range is from 1 to 10. The larger
the number you set, the higher speed.
Time/Speed
Set whether to specify the duration of a
transition by time or by speed of zoom
transition.
Trans Curve
Select the transition pattern.
The corresponding icon is displayed in the
shot transition information area.
P: Parameter level T: Transition of time
Start Timer
Set the time from start of recording to start of
the shot transition.
The countdown indication is displayed in the
shot-transition information area until the shot
transition is started by the Start Timer.
Rec Link
Set whether to link shot-transition start and
target shot selection to recording start.
The setting status is displayed in the shot
transition information area.
Preparatory Settings
S E
0s 12s
Rec Link : Of f
Progress bar
Transition pattern
Transition time
Rec Link status
Start timer indication
00:00
CAMERA SET
Return
Trans Time
Trans Speed
Time/Speed
Trans Curve
St a r t Timer
Rec Link
: 2sec
: 5
: Speed
: Soft
Stop
: Of f
: Of f
Return
Gain Setup
Shu t t e r
EX Slow Shut t e r
Shot Tr ans i t ion
MF Ass i s t : O f f
Color Bar Type : Mul t i
B
B
B
B
B
Setting Contents
Time The “Transition Time” setting is valid.
Speed The “Transition Speed” setting is
valid.
Setting
and icon Contents
Linear To make the transition linearly.
Soft Trans To make the transition slowly at
the beginning and end but linearly
in between.
Soft Stop To make the transition slowly near
the end.
T
P
T
P
T
P