Samsung OfficeServ 7000 Series - Manual (Page 28)

20
4. Press the F key to toggle to Program SYS SPEED NAME
System Speed Dial Names, step 3 to 505:
enter the name
5. Press TRSF to store and exit
programming OR press SPK to store
and advance to the next program
DEFAULT DATA: NO SPEED NUMBERS ASSIGNED
PROGRAM SYSTEM SPEED DIAL NAMES
This program is used to assign a character name or identification for each system
speed dial location. This name enables you to locate the speed dial number when
you are using the directory dial feature.You may assign a name 11 characters long.
PROGRAM KEYS
UP & DOWN - Used to scroll through speed dial bins.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPK - Used to store data and advance to next program.
HOLD - Used to clear previous entry.
ACTION DISPLAY
1. Press TRSF and then 706 SYS SPEED NAME
Display shows the first name 500:
2. Dial the system speed number (e.g., 505) SYS SPEED NAME
OR press UP or DOWN to select the entry 505:
number and press the right soft key to
move the cursor
3. Enter the name as shown in Program SYS SPEED NAME
Station Names and press the right soft 505:SAMSUNG
key to return to step 2 OR press the
F key to toggle to the speed dial number
to return to Program System Speed Dial
Numbers, step 4
4. Press the right soft key to return to step 2
above OR press TRSF to store and exit
programming OR press SPK to store and
advance to the next program
System_Administration_Guide.qxp 4/30/2007 12:56 PM Page 27