Video loss detection, Alarm schedule, English – Samsung SHR-8160 User Manual
Page 53: Using the dvr, Using the mouse may help easy setup
English
_
using the dvr
video Loss detection
You can set the alarm to be generated on a camera disconnection, which causes a video loss.
Using the mouse may help easy setup.
Use the up/down buttons (▲▼) in
move to
Video Loss State : Sets whether to activate video loss
detection.
Alarm : Sets the alarm output method.
For further information on alarm output, refer to “
HDD Alarm >
Alarm”. (Page 44)
Alarm Duration : Sets the duration of alarm signal and alarm sound.
When the video loss detection setup is done, press
alarm schedule
You can set the conditions and operating hours for scheduled alarms.
Using the mouse may help easy setup.
Use the up/down buttons (▲▼) in
move to
A window of
Alarm : Sets the alarm output method.
For further information on alarm output, refer to “
HDD Alarm >
Alarm”. (Page 44)
scheduled time.
event occurs.
Event Sync : Marked in Blue, generates alarm only when an event occurs.
Apply to All Alarm : Applies the confi gured schedule to all
alarms.
When the alarm is generated on the scheduled time, you can
stop the alarm by canceling the schedule.
When the Alarm Schedule setup is done, press
.
.
~
~
`
~
.
.
.
.
`
~
~
~
~
M
`
.
All
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Hol
OFF
ON
Event Sync
Apply to All Alarm
OK
Cancel
Alarm Schedule
Alarm1
Video Loss Detection
OK
Cancel
Previous/Next Page
CH
Video Loss State
Alarm
Alarm Duration
1
OFF
1,2,3,4
OFF
2
OFF
1,2,3,4
OFF
3
OFF
1,2,3,4
OFF
4
OFF
1,2,3,4
OFF
5
OFF
1,2,3,4
OFF
6
OFF
1,2,3,4
OFF
7
OFF
1,2,3,4
OFF
8
OFF
1,2,3,4
OFF
All
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Hol
OFF
ON
Event Sync
Apply to All Alarm
OK
Cancel
Alarm Schedule
Alarm1
Apply to All Alarm
OK
Cancel
Apply the alarm scheduling to all?
00769B_SHR-8162_ENG-NEW.indb 53
2008-12-04 오전 10:15:46