Samsung SHR-8160 - Manual (Page 39)

English _9
using the dvr
Connect a device storing the software to be updated.
(It may take about 10 seconds to recognize the device.)
You can use a USB memory or CD/DVD for updating.
Select from window.
Select .
When the recognized device appears, select .
The < Upgrade> button will be activated only if the current
< Software version> of the is same to
or older than that of < S/W Upgrade>.
Press in the “system upgrade” window.
While updating, it shows the progress.
Updating progresses with 3 steps as shown in the fi gure.
When the updating is done, it automatically restarts.
Do not turn the power off until it fi nishes restarting.
If “ Upgrade Failed” appears, retry from the step 4.
When you experience continued failure, consult the service
center for assistance.
~
1.
`
.
.
.
`
.
`
~
.
M `
 Software Version v0.02_080826225303
 Broadcast Format NTSC
 MAC Address 00:00:F0:54:FF:FF
System Management
System Information Settings
Previous
System Information
Upgrade  Device USB2FlashStorage
 Version v0.02_080826225303
S/W Upgrade
System Upgrade
OK Cancel
Current Version v0.02_080826225303
New Version v0.02_080826225303
Do you want to upgrade?
 Software Version v0.02_080826225303
 Broadcast Format NTSC
 MAC Address 00:00:F0:54:FF:FF
System Management
System Information Settings
Previous
System Information
Upgrade  Device USB2FlashStorage
 Version v0.02_080826225303
S/W Upgrade
S/W Upgrade
Software upgrading...
 Software Version v0.02_080826225303
 Broadcast Format NTSC
 MAC Address 00:00:F0:54:FF:FF
System Management
System Information Settings
Previous
System Information
Upgrade  Device USB2FlashStorage
 Version v0.02_080826225303
S/W Upgrade
S/W Upgrade
Software upgrading...
S/W Upgrade
Software upgrading...
Do not turn off during the upgrade.
00769B_SHR-8162_ENG-NEW.indb 39 2008-12-04 오전 10:15:12