5 cooking with selection of a recipe, 1 automatic cooking with selection of a recipe, Instructions for the user – Smeg CE92IPX User Manual

Page 12

Instructions for the user

Modifying the programmed data:
Once automatic cooking has started, its duration can be changed.

When the

and

symbols are steady and cooking is in progress or the oven is in standby status

waiting for cooking to start, press

. The

symbol begins to flash and by pressing the

button the cooking duration can be changed. Press the

button again. The

symbol will begin to

flash, use the

buttons to modify the the end of cooking time.

A few seconds after the last change, the

symbol will stop flashing, and automatic cooking will restart

with the new programmed data.

Once cooking has been programmed but before it starts, the symbol of the chosen function or recipe will
remain on, as will the

symbols.

10.5 Cooking with selection of a recipe

The oven has 8 preset recipes (see “10.6 Table of predefined recipes:”) and 2 memories. A recipe is a
combination of function, temperatures and cooking times presettings.

Only when PT1 is positioned on “O” it is possible to select a recipe simply by turning PT2 onto

Press the

keys; the selected recipe will change its colour to red on the display; a few seconds

later cooking will start with the preset parameters.
When the preset temperature is reached, a series of beeps will be emitted indicating that the oven is
ready for use. The cooking time as specified in the table “10.6 Table of predefined recipes:” starts from
this moment.

Modifying the data set (during cooking)
During cooking it is possible to manually change the temperature that was preset for the recipe by

turning PT1 to the desired cooking temperature. To modify the cooking time press the

key; the

symbol flashes on the display. You can increase or decrease the cooking end time using the

keys.
These changes are not saved permanently.

10.5.1 Automatic cooking with selection of a recipe

Only when the PT1 knob is positioned on “O” it is possible to select a recipe, simply by turning PT2 onto

Press the

keys; the selected recipe will change its colour to red on the display. Within a few

seconds press the

key on the display; the

symbol will flash. Press the

key again; the

symbol will start to flash; if you do not set a time within a few seconds, the oven returns to recipe mode

and starts cooking; otherwise, you can set a cooking time (max 23.59) using the

keys.

A few seconds after the last change, the display will show the current time and the oven will be in
standby waiting for the set start time.

At the end, the word STOP will appear on DSP1, cooking will stop and a buzzer will sound; press

deactivate it.

Once cooking has been programmed, before it starts, the function or recipe symbol will remain on, as
will the symbols