beautypg.com

3 poor jet action, 4 water is too hot, 5 no heat – Sundance Spas CONSTANCE 6530-512X User Manual

Page 51

background image

Page 47

ELITE SERIES

14.3 Poor jet Action

1. Press the JETS 1 button to make certain the pump #1 is on.

2. Rotate the air control clockwise to the “on” position.

3. Check for dirty filter. Clean, if necessary.

4. Make sure jets are all the way open.

14.4 Water is Too Hot

Reduce thermostat setting so the heater turns off.

14.5 No Heat

1. Check thermostat setting.

2. Keep the spa cover in place while heating.

3. Check the settings to see if your spa is in economy filtration/heating

mode (pages 32-33).

Should checking the above steps fail to correct the problem, please call

your dealer so that they may arrange service. We build the best spas in

the industry. Nonetheless, we are always striving to improve the quality

and features of our products. Your input as a Sundance spa owner is a

cherished part of this process. If you have any comments or suggestions,

or if you wish to be informed on any new products for your spa, please

write to us.

CONGRATULATIONS on your good taste and welcome to the happiest

and most relaxed family in the world!