4 cleaning the spa interior, 5 maintaining the cover, Cleaning the spa interior – Sundance Spas CONSTANCE 6530-512X User Manual
Page 43: Maintaining the cover
Page 39
ELITE SERIES
11.4 Cleaning The Spa Interior
To preserve the sheen of your spa's surface, it is crucial that you avoid
using abrasive cleaners or cleaners which have adverse chemical effect
on the surface. If you are not certain as to the suitability of a particular
cleanser, consult your authorized Sundance dealer. Regardless of the
cleanser used, use extreme care to assure that no soap residue is left on
the surface. This could cause severe sudsing when the spa is refilled.
11.5 Maintaining the Cover
Using the Sundance insulating spa cover anytime the spa is not in
use will significantly reduce your operating costs, heat-up time and
maintenance requirements. To prolong the life of the cover, handle it with
care and clean it regularly. Below are the care instructions.
A.
Standard vinyl cover maintenance
To Clean and Condition the Vinyl Cover:
1. Use a garden hose to loosen debris and dirt.
2. Using a large sponge or a soft bristle brush, use diluted or mild soap
and scrub the vinyl top. Rinse clean and do not allow soap to dry on
cover. Do not use soap on the underside of the cover.
3. Please check with your Sundance Spa Dealer for recommended
cover care and conditioning products. Condition using non-petroleum
based conditioners to keep the vinyl supple and threads/stitching
from drying out. Do not use solvents, abrasive cleaners or strong
detergents. Do not use products that contain silicone or alcohol.
B.
Sunbrella® cover maintenance
To Clean and Condition the Sunbrella Cover:
1. Brush off dirt, leaves and any loose debris.
2. Thoroughly hose down the cover.
3. Using a large sponge or a soft bristle brush, use diluted or mild soap
(such as woolite or dreft, no detergents) and scrub the cover. Allow
the solution to soak in.
4. Rinse clean and do not allow soap to dry on cover. Continue to
rinse until all the soap solution is removed. Do not use soap on the
underside of the cover. The fabric dries quickly allow it to air. Do not
apply heat or machine dry.
5. Retreating the fabric, using 303 High Tech Fabric Guard™, after
cleaning is highly recommended. Follow the instructions from the
manufacturer.
6. Additional cleaning and care information may be found at
NOTE: Do not use solvents, abrasive cleaners or detergents. Do not use
products that contain silicone or alcohol.