Sundance Spas CONSTANCE 6530-512X - Manual (Page 25)

Page 21
ELITE SERIES
8.0 Control Functions
8.1 Control Panel
A. LEd display: Can display
current water temperature
(default display), water
temperature set point,
selected filtration/heating mode, and
error messages.
B. Heat Indicator: Lit when heater is on.
C. Warmer ( ) button: Increases water temperature set point.
D. Cooler ( ) button: Decreases water temperature set point.
E. jets 1 button: Turns jets pump #1 on and off. Press once for low
speed; press a second time for high speed; press a third time to turn
pump #1 off.
F. jets 2 button: Turns high-speed jets pump #2 on and off. Press
once to turn on; press a second time to turn pump #2 off.
G. Light On/Off button: Turns waterfall, footwell and air control lights
on in unison. Press once for high intensity; press a second time for
medium intensity; press a third time for low intensity; press a fourth
time to turn off. The displayed color is changed using the light mode
button (H) below.
H. Light Mode button: Selects one of 4 color modes for waterfall,
footwell, and air control lights. See page 29 for additional
information.
Operation details
Temperat • ure Adjustment: 65-104°F (18-40°C). Factory default setting
is 100°F (38°C).
All lighting systems run for 2 hours then shut off. •
Jets 1/Jets 2 • Button Operation: Jets run for 20 minutes after
activated, then turn off automatically to conserve energy. Simply
press either jets button to continue operation for an additional 20
minutes.
1 2
A C
B
D E F G H