2 sanitizing, 3 cd ozone water maintenance system, Warning – Sundance Spas CONSTANCE 6530-512X User Manual
Page 47
Page 43
ELITE SERIES
12.2 Sanitizing
To destroy bacteria and organic compounds in the spa water, a sanitizer
must be used regularly. Chlorine and bromine are the two most popular
sanitizers used to date. SunPurity™ mineral cartridge designed
specifically for your hot tub. Many other additives are available for your
spa. Some are necessary to compensate for out-of-balance water; some
aid in cosmetic water treatment and others simply alter the feel or smell
of the water. Your authorized Sundance dealer can advise you on the
use of these additives. When adding spa shock (chlorine or non-chlorine)
or pH balancing chemicals activate the jets pump(s) and leave the spa
cover open for a minimum of 20 minutes. By doing this you will allow
excessive chemical vapors to exit the spa, protecting pillows and plastic
knobs from chemical attack.
WARNING:
RISK OF PERSONAL INjURY, dROWNING
OR ENTRAPMENT!
Never leave your hot tub unattended for any reason while
the cover is open and accessible, especially to small children
and animals!
CAUTION: RISK OF PERSONAL INjURY OR SPA dAMAGE!
Never add chlorine tablets (trichlor) or acid to your hot tub for
any reason! These chemical may damage components within
your hot tub, burn or irritate your skin, create a rash, and void
the manufacturer warranty for your spa.
!
12.3 Cd Ozone Water Maintenance System
This system is optional on North American models and standard
equipment on export 50 Hz spa models. If your spa is equipped with the
optional Sundance CD Ozone water purification system you will find that
your water stays fresh and clear with significantly less chemical sanitizer
usage. You will also probably be able to go longer between complete spa
drainings.
Note: The ozone only runs when the circulation pump is running and
shuts off when either jets pump is manually activated during spa use.
The ozone will remain off for 5 minutes after both jets pumps time out
or are manually turned off, then resume operation only if the circulation
pump continues to run.