SUPER MICRO Computer X7SBL-LN1/LN2 - Manual (Page 43)

Chapter 2: Installation
2-25
SMBus to PCI-X/PCI-Exp Slots
Jumper Settings
Jumper Setting Defi nition
Closed Enabled
Open Disabled (*Default)
VGA Enable/Disable
JPG1 enables or disables the VGA
Connector on the motherboard. See
the table on the right for jumper set-
tings. The default setting is enabled.
VGA Enable
Pin# Defi nition
Pins 1-2 Enabled (*default)
Pins 2-3 Disabled
A. JI2C1
B. JI2C2
C. JPG1
PCI/PCI-E Slots to SMB
Speeds
Jumpers JI2C1/JI2C2 allow you to
connect PCI/PCI-Exp. Slots to the
System Management Bus. The de-
fault setting is open to disable the
connection. See the table on the right
for jumper settings.
C
B
A