Sharp Aquos LC 32G4U - Manual (Page 88)

88
Other viewing options
Twin picture functions
Allows you to display two pictures on the screen at
one time.
Twin picture in all cases
You can display two same-sized pictures except when
inputting from INPUT 5 terminal and card.
Press TWIN PICTURE.
• Twin picture displays and a selected input
source image displays.
Press SELECT to set either screen to be
active.
• “ z” displays on the active screen, which has
sound output.
Press TWIN PICTURE to exit twin picture.
NOTE
• This function does not work under the following input conditions:
1PC INPUT mode,
2CARD mode,
3Two pictures from the same source (e.g. INPUT 1 and INPUT 1),
4HDTV signal source is input on the right side screen display.
• When this function is not available, “No dual screen display available”
will display.
• Pressing ANT-A/B while viewing in Twin Picture mode (TV image and
video image) with TV selected will display the TV image of the other tuner.
• Pressing ANT-A/B while viewing Twin Picture with video selected will
not change the image displayed.
• Pressing ANT-A/B while viewing Twin Picture with two TV images
displayed will not have any effect.
• Pressing ANT-A/B while viewing Twin Picture with two video images
displayed will switch the selected screen to a TV image.
Picture and still image
You can display two same-sized pictures – one moving
and one still – when inputting from an AV source.
Press FREEZE.
• A moving image displays on the left screen and
a still image displays on the right screen. The
still image is one frame captured from a moving
image at the moment you press FREEZE.
Update the still image by pressing ENTER.
• Each time you press ENTER, the image on the
right screen updates.
Press RETURN to exit still image.
NOTE
• This function does not work in PC and Card mode.
• When this function is not available, “No still image display
available.” will display.
• The still image automatically goes out after 30 minutes.
FREEZE
1
2
3
1
2
3