Tv parental guidelines (tv guidelines) – Sharp Aquos LC 32G4U User Manual
Page 83
83
Useful adjustment settings
Voluntary movie rating system (MPAA)
Press MENU and the MENU screen displays.
1
2
Press c/d to select “Setup”.
Input the 4-digit secret number by using 0 –
9.
3
Press a/b to select “Parental CTRL”, and
then press SET/ENTER.
• Secret number setting menu displays only
when “Secret No.” is set. (See page XX.)
• “V-Chip” and “Status” will not be selectable
from the menu if you do not first configure your
secret number. (See page XX.)
5
Press a/b to select “V-Chip”, and then press
ENTER.
6
V-Chip
Secret No.
Status
MENU
[Setup ... Parental CTRL]
Press a/b to select “MPAA”, and then press
ENTER.
Press a/b to adjust the item to your desired
position. “ ” indicates the item is blocked.
Press RETURN.
• The setting automatically enters “Block” for any
ratings below your selection.
• If Status is not set to “On” the configuration
settings will not work. (See page XX.)
7
MPAA
TV Guidelines
Can. English Ratings
Can. French Ratings
PG-13
R
NC-17
X
NONE
PG
G
TV Parental Guidelines (TV Guidelines)
Repeat steps 1 to 5 in Voluntary movie
rating system (MPAA).
1
2
Press a/b to select “TV Guidelines”, and
then press ENTER.
Press a/b to adjust the item to your desired
position. “ ” indicates the item is blocked.
• The setting automatically enters “Block” for any
ratings below your selection.
3
MPAA
TV Guidelines
Can. English Ratings
Can. French Ratings
L
S
V
D
TV-G
TV-PG
TV-14
TV-MA
NONE
TV-Y7
TV-Y
When setting an individual content-based rating
item, do as follows:
1 Press d to access block content items from
the currently selected age-based rating item.
2 Press a/b to select an individual item, and
then press ENTER to unblock (“
” is
removed). Repeat the same steps for other
items.
3 Press c or RETURN to register after all
individual content rating items are set.
MPAA
TV Guidelines
Can. English Ratings
Can. French Ratings
L
S
V
D
TV-G
TV-PG
TV-14
TV-MA
NONE
TV-Y7
TV-Y
4
Example
Example
Example
• If Status is not set to “On” the configuration
settings will not work. (See page XX.)