Sharp Aquos LC 32G4U - Manual (Page 30)

30
Basic adjustment settings
EZ setup
You can run EZ Setup again, even after setting up the
preset channels.
Language setting
Select from among 3 languages: English, French and
Spanish.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
1
2
Press a/b to select “EZ Setup”, and then
press ENTER.
• If you already set the Secret No., go to step 4. If
not, skip to step 5.
Input the 4-digit secret number by using 0 – 9.
3
MENU [Setup ... EZ Setup]
Setup Option
Secret No. – – – –
4
5 Press a/b to select the desired language
listed on the screen, and then press ENTER.
Language
Air/Cable
CH Search English
Español
Français
Antenna setting
Make sure what kind of connection is made with your System
when selecting “Air” or “Cable” for both ANT-A and B.
6
7
Language
Air/Cable
CH Search ANT-A
ANT-B
Air
Cable (Auto)
Searching TV channels
Press c/d to select “Air” or “Cable” for ANT-
A, then press a/b to move down.
Press c/d to select “Air” or “Cable” for ANT-
B.
Press ENTER to enter the setting.
• This operation makes the System search for both
ANT-A and B.
• There are 3 kinds of CATV system, including
Standard, HRC and IRC. Select the one matches
to your system. Select Auto when you do not know
which one to select.
Channel search
Channel auto search makes the System look for all
channels viewable in the set area.
MENU [Setup ... EZ Setup]
Setup Option
Input Label
Position
EZ Setup
CH Setup
Parental CTRL
Speaker
[Standard]
[English]
Picture Flip
Language
MENU [Setup ... EZ Setup ... CH Search]
ANT-A [ ] 25 Air [ ] 20 Found
MENU [Setup ... EZ Setup ... CH Search]
ANT-B [ ] 2 Cable [ ] 20 Found
Example
Language
Air/Cable
CH Search ANT-A
ANT-B
Air
Cable (Auto)
NOTE
• If no channel is found, make sure what kind of connection is
made with your System and try EZ setup again.
• Make sure what kind of connection is made with your System
when selecting “Air” or “Cable” for both ANT-A and B.
Example
Press c/d to select “Yes” for ANT-A, then
press a/b to move down.
Press c/d to select “Yes” for ANT-B, then
press a/b to move down to select “Search
Start” , and press ENTER.
Air/Cable
CH Search
CH Memory ANT-A Yes
ANT-B
No
Yes No
Search Start