Smeg 185426 - Manual (Page 9)

185426
The wall socket must be accessible at all
times and must be equipped with an earth
lead (in accordance with the local safety
regulations).
The permanent connection must be fitted by
an authorized personnel only.
Damaged mains power cable may be
replaced only by the producer or his
authorized personnel.
Never plug the appliance into the electric
shaver socket or hair dryer socket.
If the socket, the machine is connected to, is protected by
the overload protection switch (FID), the nominal differential
current of the switch must be 30 mA (switch mark Idn or
I∆n). In case of a smaller nominal current in the switch, the
machine may be switched off during its normal operation.
9