Smeg 185426 - Manual (Page 23)

185426
way as hours.
- Confirm setting by pushing the MENU knob (B).
- Return the program selector back to “0” position.
Set time is automatically saved.
•
Setting the Water clean sensor
In order for the Water clean sensor to start
working properly, it must be first calibrated with
water that the washing machine is connected to.
This is performed in the following manner:
- Press MENU (B) and Easy iron knobs (E),
and turn the program selector to the first
clockwise program. Display reads SENSOR
CALIBRATION.
- Start calibration by pushing the START knob
(F). The machine performs calibration procedure
automatically. During the process the reading
SENSOR CALIBRATION is flashing. When the
procedure is completed, the display reads END.
- Return the program selector (A) back to “0”
position.
If you change the inlet water source during the
use of your washing machine, or in case you
think that water quality has changed, you may
repeat the calibration procedure at any time. The
machine will save the value of the last calibration.
23