Smeg 185426 User Manual
Page 22
185426
Permanent suspension - change of program
By turning the program selector to the position
“0” the program is permanently suspended.
Consequently you may select a new program
(see Program selector).
•
Failures
Program is suspended in case a failure occurs.
This is signalled by the relevant reading
on the display and a sound signal (see cf.
Troubleshooting).
•
Power failure
If a power failure occurs the washing program is
interrupted, and when the power is restored the
program is automatically resumed.
If a power failure occurs when the drum is
still full of water, be careful not to open the
door before you pump the water out.
After certain time you may open the door if the
water level in the drum is low enough, otherwise
you must empty the water (use additional program
Drain or Spin ).
MA (models with the door opening by pressing the
G knob feature the function which enables you to
open the door of the appliance during power failure
using special lever, located adjacent to the filter).
•
Setting the time of day
- Press MENU (B) and QUICK WASH knob (D),
and turn the program selector (A) to the first
clockwise program. Display reads CLOCK and
=00:00 (hh:mm) in the right corner.
- Hours start flashing; push the SELECTOR knob
(C) to set the time of day.
- Confirm setting by pushing the MENU knob (B).
- Now minutes start flashing; they are set the same
22
Special functions
(certain models only)