Smeg 185426 - Manual (Page 21)

185426
START knob (F) and the machine will finish the
program with the spin, determined by that particular
program.
In case you would like to alter the washing program,
turn the program selector to the position “0”,
followed by the selector of rinse or merely pumping
the water out.
- End of operation
•
Sound signal indicates that you may now open
the door of the machine.
•
Extract the laundry from the drum and remove
any alien objects from the door gasket.
•
Leave the door ajar to allow the interior to dry.
•
Close the water inlet faucet.
•
Switch the machine off by turning the program
selector (A) to position “0”.
•
By the user
Temporary interruption
By pressing the START/PAUSE knob (F) the
program may be suspended at any time.
If the lock is engaged you have to deactivate it first.
Display reads PAUSE.
After certain time you may open the door if the
water level in the drum is low enough, otherwise
you must fist empty the water (use additional
program Drain or Spin ).
By pressing the START knob (F) the program is
continued where it had been interrupted.
21
Interruptions